Fluorine Lined Vertical Pipeline Pump Nitric Acid Centrifugal Pump

ISW,ISWH,IWG Series Single Stage Single Suction Horizontal Centrifugal Pump 
is jointly designed developed by the scientific technicians of our company and other domestic  water pump experts.it is shaped on excellent domestic hydraulic models,applies the performance parameter of its centrifugal pumps and skillfully built up based common horizontal pump. The pump is also a new generation of ISC type and used as hot water.high temperature and  corrosive chemical pump and oil pump according to different temperature and mediums.
This series pump features high energy saving,low noise and reliable performance etc.,complies 

Structure Explanation:
See the structure picture. This pump composes of electric motor and pump with pump structure including the pump body, impeller, pump cover, mechanical seal. The pump is single stage and single suction centrifugal and horizontal type with inlet and outlet at the same horizontal line and same dia. Able to mount on any pipe line at any place easily and small occupying place. The
Pump has foot to increase the consolidation of the pump and with the flange of inlet/outlet, a pressure hole can equip with pressure meter to ensure the pump long and lasting operation with in its rated performance.
Technology Parameters
Flow: 6.3-1600m3/h
Head: 5-150m
Rotary Speed: 980-2900r/min
Calibre: Φ15-Φ500
Temperature: 0~+120º C
Working Pressure: ≤ 1.6Mpa
Main Application:
Applied to pumping such liquid which is clean, no solid matter or frictional matter, low viscous, 
noncorrosive, non-crystallizable, chemically neutral and close to water. Such as: 
· Tank filling · Domestic water supply · Water transfer · Pressure boosting · Irrigation

Range of Application
Daily and fire water supply for constructions, air conditioning system, cyclic pressuriztion for other cold and hot clean mediums.
Characteristic
1.the pump is in horizontal structure.the suction and discharge port shave the same diameter and on a same central line.it can bu install on the pipe line like a valve.the pump is compact with good profile,take less space and low construction investment.it can be used outdoor if covered by protection hood.
2.the impellers are installed directly on the extended shaft of the motor,the axial size is short and  structure compact.the pump is rationally fitted with motor bearings too effectively balance the  radial and axial load generated during pump operation,thus to guarantee the stable pump running  low vibration and noise.
3.the shaft is sealed mechanically or with mechanic sealing set.the sealing rings are made of 
titanium alloy.it is medium-size and high temperature resistant mechanical seals. The hardened axial metal alloy is wear resistant and can effectively improve the life 
time of the mechanical seal.
4.installation and repair and done conveniently,no piping systems have to be removed to take out the whole rotor set except the screw linking the pump body and the base.
5.the pumps can be connected in series or parallel in operation according to the need of flow and delivery.
6.the pump can be installed vertically or horizontally according to the piping requirement.
Working Condition:
1. The pump system's max working pressure is 1.6MPa, i. e. The inlet of pump's pressure +pump head≤ 1.6MPa, working pressure is 2.5MPa, inlet pressure not exceed 0.3MPa, please note that if exceeding 0.3MPa, the seal of the impeller balance hole is needed to keep balance of shaft force.
2. Suitable liquid: Solid particle should not exceed 0.1% of total volume with shape not exceed 0.2mm, if the liquid containing the small particle, the mechanical seal should adopt durable type.
3. Environmental temperature should be less than 40degree. Relative moisture should not exceed 95%.