Basic Info.
Model NO.
G single screw pump
Screw Suction Method
Single Suction
Pump Shaft Position
Horizontal
Performance
Wearable
Application
Sewerage Treatment, Food, Chemical
Certification
CE, ISO, RoHS
Material
Cast Steel,SS304,SS316,Stainless Steel
Stator Material
NBR,FPM,EPDM, Food Grade Rubber
Motor
Ye3 Normal,Explosion-Proof Motor
Number of Stages
One, Two, Multistage
Capacity
0.5-500m³/H
Pressure
0-5MPa
Inlet / Outlet
20-500mm
Speed
50-1500rpm
Viscosity
1-1000000cst
Voltage
380V or as Require
Frequency
50Hz,60Hz
Max Temperature
150ºC
Mono Screw Pump
Cast Iron, Stainless Steel
Mini Helical Single Screw Pump
Feed Screw Pump
Hopper Mono Screw Pump
Open Hopper Pump, Large Opening Feed Screw Pump, C
Transport Package
Angle Steel Frame Supports Seaworthy Wooden Case
Specification
0.1-500m3/h
Trademark
yuanhan
Origin
China
HS Code
8413604090
Production Capacity
10000set/Year
Packaging & Delivery
Package Size
150.00cm * 60.00cm * 80.00cm
Package Gross Weight
300.000kg
Product Description
High Viscosity Liquid Positive Displacement Rotary Progressive Cavity Single Screw Pump
Product Description
Sinlge screw pump features:
The eccentric pump is a screw pump sealed on the inside gearing, belong to rotor displacement pump. The essential part consists of combination of a stator with two-start female thread and a rotor with single-start screw. When the driving shaft causes the rotor in planetary motion by the universal coupling, between the stator and the rotor, being in mesh continually, formed many spaces. As these spaces unchanged in voiume are axial moving, the medium handled is transmited to the outlet port from the inlet port. The liquid transmited to get not confused or disruptive, thus it is the most suitable for liffing mediums containing solid matter. abrasive particles and viscous liquids.
Performance data:
Viscosity: 1.0~ 1500 mm2/s, the viscosity can reach up to 3000000 mm2/s when reduced the speed.
Flow range: 1~ 500 m³/h;
Maximum pressure: 4.0 Mpa;
Max. Temperature: 150ºC
Horizontal Mounting/Vertical mounting
Features:
The coupling rod terminates at both ends in pin type universal joints,The pin and bushing are made of special metal, the durability of the joint is improved greatly. Simple construction. easy and quick to dismantle(Fig.l). Stator provided at both ends with external collars vulcanized to it, which provide a safe seal to the suction and discharge section. It protect the stator casing against corrosion. Between the suction casing and bearing housing is stiuated an inter changeable housing for a suiffing box or mechanical seal(pumps can be converted retrospectively to a different type of seal). pump's suction-, discharge-connections with threaded connection:according to DIN 1187-A as a standard. Thus, a quick disassembly of pipe and hose connections on suction and pressure side is possible.
Application:
For pumping neutral or corrosive liquids, uncontaminated or abrasive liquids, liquids containing gases or which tend to froth, and liquids of thigh or low viscosity, including liquids containing fibrous and solid material.
The pump of type G is the main range product of our factory. It can be widely used in many fields.
The pumps of type GS have been developed from the basic range G by a special pump casing. Type denomination " S " means quick cleaning, as the complete pump can be disassmbled with eifortless ease and a biologically impeccable cleaning of each part is possible.
*Food industry:To transfer spirit or wine, waste residue and addition in brewery.
Textile industry:To transfer synthetic fiber liquid viscose liquid.
Paper-making:To transfer black pulp.
Petro-industry : In handling various oil, grease products*Chemical industry:To transfer suspended liquid,emulsion liquid.aid
liquid, soda liquid and salt liquid.
Ship buliding :To transfer residue oil, to be the butter worth pump.
sewage pump and sea water pump ect.
Build industry:To transfer the mortar and plaster.
Nuclear industry:To transfer the radioactive liquid.
Metallurgical and mine:To transfer oxide and waste water. Liquid explosive and drain off water from mine.
Product detail: 
Equipment Display: 
Packaging & Shipping: 
FAQ:
Product Description
Sinlge screw pump features:
The eccentric pump is a screw pump sealed on the inside gearing, belong to rotor displacement pump. The essential part consists of combination of a stator with two-start female thread and a rotor with single-start screw. When the driving shaft causes the rotor in planetary motion by the universal coupling, between the stator and the rotor, being in mesh continually, formed many spaces. As these spaces unchanged in voiume are axial moving, the medium handled is transmited to the outlet port from the inlet port. The liquid transmited to get not confused or disruptive, thus it is the most suitable for liffing mediums containing solid matter. abrasive particles and viscous liquids.
Performance data:
Viscosity: 1.0~ 1500 mm2/s, the viscosity can reach up to 3000000 mm2/s when reduced the speed.
Flow range: 1~ 500 m³/h;
Maximum pressure: 4.0 Mpa;
Max. Temperature: 150ºC
Horizontal Mounting/Vertical mounting
| Product name | Single screw pump |
| Material | Cast iron,Cast steel,SS304,SS316,SS316L,2205 etc. |
| Flow rate | Max 500m3/h |
| Pressure | 0-4MPa or higher |
| Warranty | 12 months |
| Delivery medium | *Various viscous liquids,especially for liquids with high viscosity which are difficult to be pumped. *Various concentrations of fluids and separated dry medium. *A medium containing solids (up to 70%),fibers (up to 350mm)and suspended medium *Mixture of fluid,gas and solid. *Sensitive fluids that cannot be agitated,sheared and squeezed *Corrosive liquid(PH=1 to 14) |
| Application | 1.Environment protection:industrial and life sewage treatment,oily water treatment,the delivery of various muddy water with solid particles and short fiber,oilwater separation and waste gas project,measuring addition of flocculant and its chemical agents 2.Petrochemical industry.the delivery of clean/heavy oil,acid,alkail and salt solution,various viscous pasty and milky chemical grout,oil-water separation and waste oil recycling system, polymer delivery. 3.Exploration and mining delivery drilling mud,mining water supply and drainage,water supply of mining dust shaker,mortar and concrete painting of mining laneway wall. 4.Medicine and food:delivery medical ointment,syrup,jam,fermentation broth,honey,cream,starch paste,toothpaste,etc 5.Ship building bilge cleaning pump,marine incinerator delivery pump,oil-water separator matching pump,the delivery of cabin oily water and other medium. 6.Energy industry.the delivery of various fuel oil,coal-water-slurry,resin,additive. 7.Paper-making industry.the delivery of various pulp,short stock,slurry and waster water treatment,chemical measurement,stoichiometry,raw material preparation,coating and coloring process. 8.Electrolyte processing the delivery of various cream,milk,suspension and other medium cannot be stirred and cut 9.Mining engineering:the preparation and delivery of coal water slurry,the manufacturing and preparation of titanium white,kaolin,etc,filling and grouting 10.Mechanical engineering.oil-water mixture,sludge with metals,metallurgy slurry, waste bunker emptying 11.Construction industry.the delivery of cement motra,painting,lime milk and other paste liquid. |
Features:
The coupling rod terminates at both ends in pin type universal joints,The pin and bushing are made of special metal, the durability of the joint is improved greatly. Simple construction. easy and quick to dismantle(Fig.l). Stator provided at both ends with external collars vulcanized to it, which provide a safe seal to the suction and discharge section. It protect the stator casing against corrosion. Between the suction casing and bearing housing is stiuated an inter changeable housing for a suiffing box or mechanical seal(pumps can be converted retrospectively to a different type of seal). pump's suction-, discharge-connections with threaded connection:according to DIN 1187-A as a standard. Thus, a quick disassembly of pipe and hose connections on suction and pressure side is possible.
Application:
For pumping neutral or corrosive liquids, uncontaminated or abrasive liquids, liquids containing gases or which tend to froth, and liquids of thigh or low viscosity, including liquids containing fibrous and solid material.
The pump of type G is the main range product of our factory. It can be widely used in many fields.
The pumps of type GS have been developed from the basic range G by a special pump casing. Type denomination " S " means quick cleaning, as the complete pump can be disassmbled with eifortless ease and a biologically impeccable cleaning of each part is possible.
*Food industry:To transfer spirit or wine, waste residue and addition in brewery.
Textile industry:To transfer synthetic fiber liquid viscose liquid.
Paper-making:To transfer black pulp.
Petro-industry : In handling various oil, grease products*Chemical industry:To transfer suspended liquid,emulsion liquid.aid
liquid, soda liquid and salt liquid.
Ship buliding :To transfer residue oil, to be the butter worth pump.
sewage pump and sea water pump ect.
Build industry:To transfer the mortar and plaster.
Nuclear industry:To transfer the radioactive liquid.
Metallurgical and mine:To transfer oxide and waste water. Liquid explosive and drain off water from mine.
Product detail:
Packaging & Shipping:
FAQ:
