Basic Info.
Product Description
Flow rate:39.6-86.4m3/hr
Head H(m): 12-64
Speed: 1300-2700rpm
Efficiency: Max55%
Materials: Impeller R55
Impeller: 5-Vane Open Type
Vane Diameter(mm): 214
Power: Max 55Kw
Color: Depend on customers' requirements
Weight: 154KG
NPSH (m): 4-6
Warranty: 1 year Warranty (except wet-end parts)
Type Meaning:ZHR/75D
ZH: Heavy duty slurry pump
R: Rubber Lined
75: Outlet diameter 75mm
D: Base Type
Materials:Rubber(Exchangeable with High Chromium Alloy and Polyurethane )
Applications:They are widely used in metallurgy, mining, petroleum, chemical industry, coal, electric power, transportation, river dredging, building materials and municipal engineering etc.
Structure type: Type ZHR slurry pumps are double shell cantilever horizontal centrifugal pump.
Transport materials: They are designed for conveying strong corrosion and high concentration slag slurry.
Lining materials: Wear resistant metal lining and rubber lining , they can be used interchangeably.
Characteristics:
Type ZHR, also called Rubber Lined heavy-duty slurry pump.Because this type of pump has thick wear parts and heavy base,Therefore, it is suitable for conveying strong abrasion, high concentration slag slurry or low concentration high lift slag slurry,Within the maximum allowable working pressure range of the pump, it can be used in series.Among them, type ZHR pump is suitable for conveying low concentration high lift slag slurry or high concentration low abrasion high lift slag slurry.The above types of pumps can also be used for slag slurry with certain abrasiveness.
Introduction:
The advantages of ZHR/50C rubber lined slurry pump:
1. Anti-corrosive rubber liner has features of wide range of performance, high efficiency and high performance cost ratio.
2. Rubber discharge end is light, thus easy to install and maintain.
3. As the name suggests, anti-corrosive rubber liner is made of rubber which is of high elasticity and chemical stability. The rubber also absorbs noise and vibration, which is more anti-corrosive than high chromium alloy
4. Some metallurgy design and research institutes and universities of science and technology provide lots of technological supports. Thus, our rubber discharge end is trustworthy and effective.
5. A series of quality tests are carried out when rubber mill discharge liner is being used.
Hotsale Pumps:
Specifications:
| Pump Model | ZHR/50C |
| Outlet | 2-inch |
| Capacity | 39-86.6m3/h |
| TDH | 13-46m |
| Rated Motor Power | 30Kw |
| Speed | 1300-2300r/min |
| NPSH | 2-4m |
Specifications:
| Pump Model | S×D (inch) | Allowable Max. Power (kw) | Material | Clear Water Performance | Impeller | ||||||
| Capacity Q | Head H(m) | Speed n(r/min) | Max.Eff. η% | NPSH (m) | No. of Vanes | Vane Dia. (mm) | |||||
| Impeller | m3/h | l/s | |||||||||
| ZH/25B | 1.5×1 | 15 | Metal (A05) | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 5 | 152 |
| ZH/40B | 2×1.5 | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 184 | ||
| ZH/50C | 3×2 | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 214 | ||
| ZH/75C | 4×3 | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 | ||
| ZH/75D | 4×3 | 60 | 245 | ||||||||
| ZH/100D | 6×4 | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 | ||
| ZH/100E | 6×4 | 120 | 365 | ||||||||
| ZH/150E | 8×6 | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 | ||
| ZH/150F | 8×6 | 260 | 510 | ||||||||
| ZH/150R | 8×6 | 300 | 510 | ||||||||
| ZH/200F | 10×8 | 260 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | ||
| ZH/200ST | 10×8 | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | ||
| ZH/250F | 12×10 | 260 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | ||
| ZH/250ST | 12×10 | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | ||
| ZH/300ST | 14×12 | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 965 | ||
| ZH/350TU | 16×14 | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 1067 | ||
Applications:
Heavy duty slurry pumping applications
Mining and minerals processing
Mine refuse and tailings
Mill discharge
Cyclone feed
Sand and aggregates
Constructions:
Materials:
| Description of Parts | Material | Material Code |
| Pump Body, Split-Casing | Grey Iron | G20/G21 |
| Ductile Iron | D20/D21 | |
| Impeller, Volute, Wear Liners, Expeller, Expeller Ring, Stuffing Box | 27% High Chrome | A05 |
| 15/3 Chrome/Moly Iron | A07 | |
| Corrosion-resistant 35% Chrome | A33 | |
| 28% High Chrome, Low Carbon | A49 | |
| Shaft | 304 Stainless Steel | C21 |
| 316 Stainless Steel | C23 | |
| Shaft Sleeve | 304 Stainless Steel | C21 |
| 316 Stainless Steel | C23 | |
| Aluminum Oxide Coating, White | J04 | |
| Chrome Oxide Coating, Black | J05 |
Driven Type:
DC(z): The pump and the engine is directlyconnetced by a coupling.
Belt-driven Types: The pump and the engine is connetced by pulleys and belts - CV, CR(z), ZV(z).
Related Products:
FAQ
Q1. Are you a manufacturer?
Yes, we are a group company with both industrial pumps manufacturing,design, test,and marketing for 20 years.
Q2. What information is needed if i want to get a quotation?
Liquid:___
Capacity:___ m3/hr or ___L/S
Head: ___ m
PH:___
Specific of gravity:___
Voltage:___V, Frequency:___Hz
Q3.What material pump can you supply?
A05, Natural rubber, polyurethane etc.
Q4. Can you supply special or OEM parts?
Yes, please send me the detailed drawing or parts code to check.
Q5. Is it available to print our own brand on the pump?
Totally acceptable as international rules.
Q6. What markets do your pumps export to?
Europe, North & South America, South-East Asia, Africa, Oceania, Middle East countries. Our overseas agent in Italy, Russia, America and Africa are gradually improving.
Q5. How can I get immediately reply from you?
You can connect with us through any of the following contact information. We will reply you within 24 hours.
Standard Export Packing:
