Basic Info.
Model NO.
IH
Position of Pump Shaft
Horizontal Pump
Impeller
Closed
Usage
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Chemical Water
Type
Ih
Color
Blue
Material
Cast Iron
Motor
100% Cooper Wire
Pressure
High Pressure
Transport Package
Wooden Box
Specification
ISO9001/CE
Trademark
LYSON or OEM
Origin
Shanghai, China
HS Code
8413709990
Production Capacity
50000/Month
Product Description
Products Name: Chemical Plant Transfer Industrial Water Pump
Conditions of use: Suitable for conveying the temperature under 80 celsius water and similar to that of liquid water, pump system working pressure of up to 12.5 bar.
The scope of performance parameter: This series a total of 29 species, 151 kinds of specifications and its
performance parameters range:
1 flow Q= 6.3 ~ 400m3/h
2. Lift H=5 ~ 125m
3. Speed n=1450/2950 r/min
4. Power P=0.55~ 90kW
5. Diameter of inlet Dna=50 ~ 200mm
6. Outlet diameter DNm=32 ~ 150mm
| fault phenomenon | failure cause | elimination methods |
| The manual is normal Automatic transmission failure | 1.No power supply or one or two phase power supply is needed | Check all phases of power supply and restore power supply |
| Water level is too low | Put water in the sink | |
| The motor burned | Repair or replace the motor | |
| 1.Line is loose | Check wiring and tighten connectors | |
| 2.Frequency converter malfunction | Check the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting. | |
| 3The frequency converter is damaged | Repair or replace | |
| 4.Pressure switch damage | Repair or replace | |
| 5The pressure transmitter is damaged | Repair or replace | |
| 6.Switch failure | Repair or replace | |
| Pump non - suction pressure gauge pointer to beat violently | Insufficient water supply for perfusion, air leakage at the connection between pipeline and instrument | Check pipeline and bottom valve, refill water diversion. Tighten air leakage |
The pump consumes too much power | Too much flow, impeller wear | Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow |
